Ford Focus ST/RS Injectors – Set 5
Bosch Replacement Injectors 550cc – for use with modified and tuned Focus ST and RS Injectors. – You will require a remap to run these injectors.
0280158117, 50 lbs/hr; 532 cc/min
List prices include one (5) fuel injectors
Sets guaranteed flow-matched to within 1-2%
Engine-horsepower ratings for naturally aspirated and turbocharged engines running 91-93 octane gasoline:
L4: 324, 270
V-6, L6: cylinder: 486, 405
V-8: 649, 541
This is a high performance, high volume racing fuel injector.
The fuel delivery is from a 6-hole disc, incorporating a very-wide, split-spray pattern for maximum fuel atomization for modern single-valve and multi-valve engines. Can be angled to spray front or back.
All New Generation Bosch EV14 fuel injectors will function at rail pressures in excess of 101 PSI, 7 bar.
Will maintain consistency to a minimum pulse width of only 1.5 ms.
Excellent low pulse width response with predictable response down to 2ms.
Excellent atomization for modern multi-valve engines.
Body Design: EV14, Composite plastic w/internal filter
Injector type: Saturated
Fuel Nozzle: 6-hole disc – max atomization
Flow rates: (All tests conducted using the industry standard Heptane).
490 cc/min, 47 lbs/hr at 43.5 psi. (3.0 bar) – FORD SPECIFIC 80% DUTY CYCLE
Sample 3 BAR Latency (dead time/offset): 14 volts, 0.538 ms; 12 volts, 0.846 ms
Length: 2.6 inches, 65 mm
Body Diameter: 0.6 inches, 15.25 mm
O-rings: Viton, Top and bottom, 14.5mm
Resistance: 12.7-13.1 Ohms
Static Flow Rate, 3 BAR: 532 cc/min
Electrical connector type: U.S. CAR (EV6)
Part number: 0280158117